High quality ball sterilizer in a plastic case, presented by Global Fashion. The ball sterilizer is also called quartz. It is designed for high-temperature processing of metal tools. The outer body of the sterilizer features a durable plastic housing that is practically not heated during operation. The inner bulb is made of heat-resistant metal.

Into this flask filled balls made of quartz glass, which are supplied. During operation of the sterilizer the temperature of the flask reaches 185 degrees, and the temperature of the balls inside it reaches 250 degrees.

At this temperature, quickly kill almost all known bacteria, complex viruses, fungi, and other trace minerals. When you turn on the sterilizer lights red and green light. The red light means that the sterilizer is on, the green light means that the device is in the mode of warm-up. During heating the balls until the maximum temperature is 15 minutes.

If the sterilizer is used in salon, it can be switched on throughout the working day. Before sterilization the instruments should be thoroughly cleaned and disinfected with a special solution. How to disinfect tool, you can learn from the guidelines to the drug that you are using. After that, the tools should be dry. To prevent corrosion of tools place tools in a wet ball sterilizer is not recommended. Sterilization of instruments is done in a very short time – no more than 20 seconds. A prolonged exposure to high temperature leads to blunting of tools. White housing. Capacity of machine: 100 watts. Settings small sterilizer: the diameter of the lower part 16 cm, height 17 cm, weight with balls – 720 grams. The parameters of a large sterilizer: the diameter of the lower part 16 cm, height 20 cm, weight with balls – 785 grams. It is important to know that over time, couples lose the good heat conductivity and can not be heated to a temperature of 250 degrees. It is therefore recommended every six months to completely change the filling: silica beads, which can be purchased separately.

Specification:

Heating time: 15 minutes

Sterilization time: 10 - 15 seconds

Temperature: reaches 250 ° C

Rated voltage: 220 V

Frequency: 50-60 Hz

Weight: 720 g

Sterilizer ball G-70

Code of product: 6920
Item number: G-70
Stock balance: not available
320 MDL
16,76 €
18,14 $
20 bought
20 bought
Description

High quality ball sterilizer in a plastic case, presented by Global Fashion. The ball sterilizer is also called quartz. It is designed for high-temperature processing of metal tools. The outer body of the sterilizer features a durable plastic housing that is practically not heated during operation. The inner bulb is made of heat-resistant metal.

Into this flask filled balls made of quartz glass, which are supplied. During operation of the sterilizer the temperature of the flask reaches 185 degrees, and the temperature of the balls inside it reaches 250 degrees.

At this temperature, quickly kill almost all known bacteria, complex viruses, fungi, and other trace minerals. When you turn on the sterilizer lights red and green light. The red light means that the sterilizer is on, the green light means that the device is in the mode of warm-up. During heating the balls until the maximum temperature is 15 minutes.

If the sterilizer is used in salon, it can be switched on throughout the working day. Before sterilization the instruments should be thoroughly cleaned and disinfected with a special solution. How to disinfect tool, you can learn from the guidelines to the drug that you are using. After that, the tools should be dry. To prevent corrosion of tools place tools in a wet ball sterilizer is not recommended. Sterilization of instruments is done in a very short time – no more than 20 seconds. A prolonged exposure to high temperature leads to blunting of tools. White housing. Capacity of machine: 100 watts. Settings small sterilizer: the diameter of the lower part 16 cm, height 17 cm, weight with balls – 720 grams. The parameters of a large sterilizer: the diameter of the lower part 16 cm, height 20 cm, weight with balls – 785 grams. It is important to know that over time, couples lose the good heat conductivity and can not be heated to a temperature of 250 degrees. It is therefore recommended every six months to completely change the filling: silica beads, which can be purchased separately.

Specification:

Heating time: 15 minutes

Sterilization time: 10 - 15 seconds

Temperature: reaches 250 ° C

Rated voltage: 220 V

Frequency: 50-60 Hz

Weight: 720 g

Specification
Specification
Item number G-70
Viewers 958
Reviews (0)

Select the appropriate
number of stars

Photo review

There are no reviews for this product.

The Sterilizer Ball G-70 is a device that is commonly used in nail salons to sterilize tools that are used for nail extensions. It is designed to kill harmful bacteria and viruses that could be transferred from one customer to another, thereby preventing the spread of infections.

The Sterilizer Ball G-70 is made of high-quality stainless steel and is fitted with a heating element that raises the temperature of the ball to a highly effective sterilization level. To use it, the ball is heated up and tools such as nail clippers, cuticle pushers, and scissors are placed inside. The ball is then sealed and left to work for a specified time, which may vary depending on the specific model.

One major advantage of the Sterilizer Ball G-70 is that it is easy to use and requires minimal training. It does not use chemicals or liquids, which can be expensive and time-consuming to replenish. Instead, it relies on heat to sterilize the tools, which is a highly effective means of killing bacteria and viruses.

Another benefit of the Sterilizer Ball G-70 is that it is a highly efficient device. It can sterilize multiple tools at once, making it ideal for use in busy nail salons that need to sterilize tools quickly and effectively. This way, customers can rest easy knowing that the tools used on them have been sterilized and are safe to use.

It is important to note that the Sterilizer Ball G-70 is not a substitute for proper cleaning and maintenance of tools. Instead, it works in tandem with standard cleaning procedures to provide an extra level of protection against harmful bacteria and viruses.

In conclusion, the Sterilizer Ball G-70 is an excellent device that can facilitate safe and hygienic nail extensions. By choosing to use this device, nail salon owners can demonstrate their commitment to customer safety and provide a higher level of service to their valued clientele.